Yaesu FT-70D and Zumspot

I have been learning a few real tricks to controlling the Zumspot via my Radio. The Zumspot
runs on the popular P-Star software.


Here are a few instructions: 

To connect to popular FCS reflector rooms such as America Link and America Rag Chew:

1.  First configure your pi-star software to use the YSF mode. 
2.  Set your radio to Wires-x mode to utilize the room linking commands.
     Click on the F (Function Key) and Click on the AMS key (Wires X mode)
3. Twist your top channel selector knob to display "En*"
4. Using the keypad enter the following numbers for the above popular rooms:

    00140 = FCS285 America Rag Chew
    00142 = FSC290 America Link

5. To complete the connection press the AMS key again.

The hotspot should connect to the reflector.

 I will edit this post with more that I find.

You can also connect to wires YSF reflectors by using the codes found on the
left hand column of the chart linked below.

https://www.pistar.uk/ysf_reflectors.php

Some FCS and YSF reflectors are linked together.

Some of the more populear YSF reflectors I have found are:

21636 - Texas Nexus
37099 - Quadnet Array
95984 - SouthEast Link
66497 - Street Corner